Incident a lesson for farmers who own stock loading ramps

A truck driver was left with a skull fracture and significant head injuries after a stock loading ramp used to unload sheep from a truck fell on him in October 2017 when its winch system failed.

A truck driver was left with a skull fracture and significant head injuries after a stock loading ramp used to unload sheep from a truck fell on him in October 2017 when its winch system failed.

WorkSafe says the incident is a reminder that all stock loading ramps should be fitted with an automatic brake winch system to prevent unwinding.

In a decision released by the Dunedin District Court this week, Palmerston based farmer Robert Kirk Ashton was fined $33,000.

Mr Ashton had not ensured that the 250-300kg stock loading ramp he owned was without risks to any person and a WorkSafe investigation found that the ramp handle could dislodge from the winch shaft and that no automatic brake system was in place for when the ramp was being lowered.

WorkSafe’s Head of Specialist Interventions Simon Humphries said the worker had spent almost a month in hospital and was unable to work for nine months following the incident.

“The safety of workers can’t be left to chance and this worker has lifelong vision and hearing impairments as a result of a farmer’s substandard equipment.

“Take the time to check your gear and if you have any concerns, engage a competent engineer to take a look and get things tidied up before your next truck arrives.”

WorkSafe has issued a technical bulletin for owners and users of mobile stock loading ramps available here(external link).

Notes:

  • A fine of $33,000 was imposed.
  • Reparation of $40,000 was awarded.
  • Robert Kirk Ashton was sentenced under sections 38(1), 48(1) and 2(b) of the Health and Safety at Work Act 2015.
    • Being a PCBU, who manages or controls fixtures, fittings or plant at a workplace, namely a stock ramp, and having a duty to ensure so far as reasonably practicable that fixtures, fittings or plant are without risks to the health and safety of any person, did fail to comply with that duty, and that failure exposed people to a risk of death or serious injury.
  • The maximum penalty is a fine not exceeding $300,000.

Media contact details

For more information you can contact our Media Team using our media request form. Alternatively, you can:

Phone: 021 823 007 or

Email: media@worksafe.govt.nz

Help improve our website